Web Tech

Designers & Manufacturers of Weighing & Feeding Solutions

  • Ph: 1800 777 906

Low Capacity Weigh Belt Feeder

Web Tech AutoWeigh’s low capacity weigh belt feeder/weigh feeder range includes our models “WT Ultra Low Capacity”WT735”, “WT1200” and “WT2000. These are typically used in the following industries and applications:

  • Food
  • Powder and granular materials
  • Chemical
  • Building material production
  • Plastics
  • Detergents

Low Capacity Weigh Belt feeders are available in:

  • Belt widths ranging from 300 mm to 1050 mm
  • Capacities up to 30 m3/hr
  • Manufactured from stainless steel
  • Short inlet to discharge centres

 

NEW

Introducing our new Ultra Low Capacity Weigh Feeder

 

Ultra low capacity weigh belt feeder

The “WT Ultra Low Capacity” weigh belt feeder is a

  • Light material, light weight
  • High precision: accuracies in the order of ±0.25% to ±0.5%
  • Belt widths of 200mm -750mm
  • Bolt together, minimal tools required
  • Easily dismounted/unassembled
  • Over centre belt tension release
  • Motor mount options (reversible)
  • Easy belt removal & replacement

Click here to download the “WT ultra low capacity” brochure.

WT735

Open construction low capacity weigh belt feeder

±0.25% to ±0.5%*

Model “WT735” is one of Web Tech AutoWeigh’s low capacity type weigh belt feeders.

General Features

  • 735mm inlet to discharge centres
  • Available in belt widths of 300mm and 600mm
  • Maximum capacity of approximately 20m3/hour (depending on material type)
  • Accuracies in the order of ±0.25% to ±0.5% are achievable
  • Available in both Open and enclosed dust tight construction
  • All stainless steel construction

Click here to download the “WT735” brochure. 

 

WT1200

 

Open construction low capacity weigh belt feeder

±0.25% to ±0.5%*

Model “WT1200” is a Web Tech AutoWeigh low capacity type weigh belt feeder

Features

  • 1200mm inlet to discharge centres
  • Available in belt widths of 300mm, 450mm, 600mm, 750mm, 900mm and 1050mm
  • Maximum capacity of approximately 30m3/hour (depending on material type)
  • Accuracies in the order of ±0.25% to ±0.5% are achievable
  • Available in both open and enclosed dust tight construction
  • All stainless steel construction

Click here to download the “WT1200” brochure. 

 

WT2000

Fully enclosed low capacity weigh belt feeder

±0.25% to ±0.5%*

The model “WT2000” is an extended version of our model “WT1200” low capacity weigh belt feeder. The “WT2000” model can be supplied with our inlet chute control system. This system is ideally suited for materials that aerate and can tend to flood. The inlet chute control system incorporates an extended length inlet chute that is constantly monitored using a separate weighing system, or by level probes. An output is provided to control a pre-feeder.

Features

  • 2000mm inlet to discharge centres
  • Available in belt widths of 300mm, 450mm, 600mm, 750mm, 900mm and 1050mm
  • Maximum capacity of approximately 30m3/hour (depending on material type)
  • Accuracies in the order of ±0.25% to ±0.5% are achievable
  • Available in both open and enclosed dust tight construction
  • All stainless steel construction
  • External enclosure can be supplied in either powder coated mild steel or in stainless steel

Click here to download the “WT2000” brochure. 

As standard all our weigh feeder systems are supplied with a speed sensor, pre-mounted junction boxes, calibration equipment and an electronic integrator/controller.

Should you require a proposal from us for any application you may have, please complete as much of our Weigh Belt Feeder Application Data Sheet as is known, and we would be pleased to provide our recommendations.

Web Tech AutoWeigh has been in the continuous weighing industry for over 30 years. Our weigh feeders are designed and manufactured in Australia. We have a proven track record with the world’s largest food, mining and recycling companies.

Low capacity weigh belt feeder with potato

UA-63910635-1