Web Tech AutoWeigh

Designers & Manufacturers of Weighing & Feeding Solutions

  • Ph: 1800 777 906

Inventory Conveyor Belt Scales / Belt Weighers

Inventory conveyor belt scales are used in applications where the accuracy achievable by a “process” type belt scale is not sufficient. Applications include:

  • The monitoring of plant performance
  • The monitoring of material deposited onto a stockpile
  • The monitoring of material deposited into trucks

Inventory conveyor belt scales  include:

  • Dual idler weigh frame
  • Weigh quality idlers
  • Speed sensor
  • Load cells
  • Calibration equipment
  • Electronic integrator/controller
  • Accuracies of ±0.5% to ±1% subject to application

Please check the Belt Scale Installation Guide for ideal locations for an inventory conveyor belt scale.
Depending on the application and material loading on the conveyor, the following model Belt Scales can be used


WTE2 Dual Idler,4 load cell Inventory Type Conveyor Belt Scale - Idlers Not Shown,  with Calibration Bars

WTE2 Dual Idler Belt Scale -Idlers Not Shown



The WTE2 is an inventory” type conveyor belt scales, designed for applications with relatively low belt loadings and low bulk density materials (e.g. wood chips).


  • Fully suspended dual idler.
  • Four (4) internally mounted load cells
  • Belt widths from 450 mm-1200 mm
  • Standard idler spacings of 1000 mm, 1200 mm and 1500 mm
  • Galvanised mild steel (stainless steel optional)
  • Accuracies in the order of ±0.5% (subject to application)


 WTS2 Dual Idler, 4 load cell Heavy Duty Inventory Type Conveyor Belt Scale - Idlers Shown on the weigh frame and attachment s for Calibration Bars. This weigh frame has the capability of accuracies up to 0.5%



The WTS2  is an inventory conveyor belt scale designed for heavy duty applications such as the mining industry.


  • Fully suspended dual idler, heavy duty weigh frame
  • Four (4) internally mounted load cells
  • Belt widths 450 mm – 2400 mm
  • Standard idler spacings – 1000 mm, 1200 mm,1500 mm
  • Galvanised mild steel (stainless steel optional)
  • Accuracies  of ±0.5% (subject to application)

For all  applications,recommendations and pricing ,please complete the  Belt Scale Application Data Sheet

Many belt scale applications also require metal detectors.Web Tech can also supply these if required.

WTS2 Dual idler Belt Scale cross member showing one of the  load cells location

WTS2 Belt Scale

↑ Back To Top ↑